Principle of Cable Clamp
Cable clamp is composed of clamp, spring, pin and switch pin. There is a guide groove in the upper and lower sides of the H-shaped clamp. There are four square holes corresponding to the upper and lower sides of the guide groove. One side of the clamp is two parallel connection boards, and the other side is a connection board. There are circular holes with the same aperture in each connection board. The clamp body is made of steel plate and nylon. The shape of the clamp body is an asymmetrical H-shaped structure with central traction. The method of fixing cable and water pipe by cable clamp is realized by spring clamp. The utility model has wide applicability and can be used in high-grade general mining and fully mechanized mining.